Steps To Follow In Order To Find The Electronic Components Supplier

Selecting the right electronic supplier is the foremost step to ensure that you get quality electronic components. Whether it is new or obsolete and discontinued electronic components, if you want to buy any component when the need arises, you should look for the suppliers that supply hard to find, long lead time electronic components.

Always be careful and never purchase counterfeit parts or any of the damaged components. For the long term sustenance of the components, it is necessary to go for the right vendor. Doing proper research about the technical knowledge, marketing, customer support system, product range and other factors should be considered before choosing your dealer.

The suppliers you decide on should be authenticated and certified to do this business. Fraudulent firms providing counterfeit products should be avoided. If the products turned out to be fake rather than genuine original products could create some serious problems later.

Next thing to keep in mind is the timely delivery. If the product arrives too late then it's of no use. So the suppliers which can provide you products under the agreed time have the potential to make the successful business partnership.

And the price of the components should be the standard ongoing market price. However if you are getting exceptional services with extra bucks and if they are within your budget, then paying more is totally worth it.

Next one is the component testing. The components have to be checked time to time for defects and flaws. All these steps are crucial to find the suitable components supplier. This way you don't have to worry about fake or defective pieces reaching you.

And the parts which have now become out of date can be difficult to find. So the dealer which can provide you any component in timely manner is the one you should prioritize even if you have to pay extra than the normal fees charged.

How to Test the Basic Electronic Components?

PCB, printed circuit board, is composed of variety of basic electronic components including capacitors, resistors, diodes, transistors and fuses. If any one of the component fails, the PCB may fail. Therefore, after buying electronic component from distributor, it’s important that each component be monitored and tested so that the performance is not hindered.

You may need a test gear for testing the components. The most suitable item of test gear is Multimeter. This can test almost 90% of all components.

Before you measure any component, you need to know what you are checking. If you are measuring voltage, select the AC range or DC range. If you are measuring resistance, select the Ohms range (x1 to x10k). If you are measuring current, select the appropriate current range DCmA 0.5mA to500mA.

You must select a voltage or current range that is higher than the maximum expected value, to avoid the needle swinging across the scale and hitting the end stop.

Reading 4-Band Resistors

Commonly the resistor has 4 bands and is called 10% resistor. Before testing a resistor, find the accurate reading for the specific resistor. Then connect the multimeter leads to specific resistor and then run a test. If the results are too high, this may indicate an open resistor or a resistor that has acquired a higher value.

Testing a Capacitor

One end of the capacitor should be removed from the circuit. The power supply to the capacitor should match the range of the capacitor so as not to overload the device. The possible outcomes can be the capacitor can short the meter that will reflect the output voltage of the power supply; if the capacitor is leaking, the meter reading will fluctuate, if the meter registers no jump at all, the capacitance is too low to register a result.

Testing a Diode

Disconnect one end of the diode from the circuit board and use an analog meter, identify the red and black meter probes. Set the meter between 1 and 10 ohms, connect the black probe to the cathode and the red probe to the anode. If the meter registers two readings, the diode may be leaky. If the meter registers some resistance, then the diode is forward biased.

To get the maximum performance, proper testing procedure should be followed along with the precautions.

Importance Of The Inventory Management For Electronic Component Suppliers

Inventory management is an integral part of an electronic component supplier’s business. It has been illustrated as an important process time and again. When we talk about electronic components inventory management, it generates profound interest among the employees, team leads and management.

Inventory management can yield fruitful results as it helps the businesses to cut down on costs. This contributes to the ‘feel good factor’ of the employees. The aim of the practice is to develop lean thinking in the company and manage excess inventory of the electronic components.

Large scale suppliers dedicate a lot of time in developing organized systems for managing the bulk of products. With an efficient inventory management system in place, the processes become swift and cost effective. It also improves the following areas of business.

Purchase Orders (internal & overhead costs)
Maintaining the right inventory allows suppliers to cope with the practice of unnecessary purchases.


Documentation, inspection and handling of electronic components
Some companies observe the practice of ‘First In-First Out’ to ensure old stock doesn’t get left behind while fresh stock makes its way out. Documentation along with proper labelling allows better product management in business.


Unexpected obsolescence of components
Advancements in technology can be observed regularly. Maintaining the right stock of electronic components will allow the suppliers to purchase new and advanced technology to replenish the stock. Situations of over-purchasing the obsolete electronic components can be avoided too.

The proper inventory management of electronic components can bring significant improvement for the organization. In addition, customers also prefer firms that have a large inventory where they can get any electronic component they want for their applications.